Need Help?  800-733-4063

My Cart

Loading...

22.5" Beam Saw (3 phase with 60" crosscut)

$16,347.79

  • 7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor
  • 50/60 HZ 208, 230, 460 or 575 volt motor
  • 60” crosscut
  • 8” depth of cut
  • Automatic Electro-Mechanical Brake
  • Manual Chain Crank Crossfeed
  • Magnetic Starter with Low Voltage Controls
  • T-slot Extruded Metal Table
  • Manual Clamping
  • Extruded Aluminum Fence
  • Complete Upper and Lower Blade Guarding
  • Replaceable Track
  • ON/OFF Push Buttons with E-Stop
  • Powder Coated Steel Frame and Legs
  • Wrench Kit
  • Made in the USA

Frequently Bought Together

+ + 22.5" Aluminum Crosscut Blade for Radial Arm Saws and Beam Saws
Price for all three: $17,383.37
Loading...

Description

The Workhorse of Cutting Applications – 22.5″ Beam Saw

The 22.5″ Beam Saw (3 phase with 60″ crosscut) model 3691-01-07 is the largest saw manufactured by Original Saw Company. This Beam Saw model maxes out at 1500 pounds and is constructed of cast iron, cast aluminum, a box tubing beam, and a steel frame. Use this Beam Saw to make repeated cuts in an industrial setting.

This Beam Saw features a massive 8” depth of cut in a single pass and has the crosscut capacity of 60″ on 1″ stock. Model 3691-01-07 can also bevel cut a full 4″. This machine is made to withstand years of industrial cutting. With a powerful 7.5 HP motor, the Beam Saw can cut several pieces of material at a time.

22.5″ Beam Saw Sets Itself Apart from the Rest

The 22.5-inch model utilizes a Variable Frequency Drive (VFD) to control the arbor motor. Using the VFD allows the speed of the blade to increase over 8 seconds, which results in a smooth start-up.

Do you have the capability to run 3 phase power at your location? If so, this is the model you want. 3 phase power creates a smoother motor start-up. There tends to be less maintenance and longer service life with no relays or capacitors inside the motor.

Additional information

Weight 1500 lbs
Dimensions 102 × 52 × 52 in
Motor

7.5 hp 3 phase TEFC (totally enclosed, fan cooled) motor

Product Length (Inches)

Product Width (Inches)

Product Height (Inches)

Cuttable Material

, , , , , , , ,

Can do the following cuts

,

Max Crosscut

Max Depth Cut

Capable of Rip Cuts

Voltage Options

, , ,

Phases of Voltage Available

Pneumatic Clamping Ability?

Powered Feed Option?

Ordering & Shipping

Manufacturing of Beam Saws happens after the customer orders. Machines are considered custom and made voltage specific. If you are unsure about the power requirements of your location, please get in touch with an electrician.

Because some cutting applications are custom and specific, our team may contact you about your purchase. It is our priority to build a saw that fits our customers’ needs.

Beam Saws are assembled and tested in our facility. After being test run, the saw is packaged and placed on a skid. The legs are attached to the skid. This makes setup and installation easy.

When the saw is delivered, simply:

  1. Lift the machine.
  2. Install the legs and braces.
  3. Wire in the mag starter.
  4. Install the saw blade of your choice.

These machines have provided cutting solutions to thousands of manufacturing companies throughout the world. Count on everyday repeatability and accuracy for years to come.

  • Setup Machine Height – 65” (1651 mm)
  • Setup Machine Depth – 100” (12540 mm)
  • Approximate Shipping Weight – 1500 lbs
  • Approximate Shipping Dimensions – 102”x52”x48”

PDF-ComingSoon

Reviews

There are no reviews yet.

Be the first to review “22.5″ Beam Saw (3 phase with 60″ crosscut)”

Your email address will not be published.

  • 60” (1524 mm) maximum crosscut from 1” stock
  • 8” (203 mm) maximum depth of cut
  • 4” (100 mm) maximum depth of cut at 45 degree bevel
  • Cutting Table Height – 34 ½ ” (876 mm)

Beam Saws are utilized in a variety of industries. With its generous depth of cut, 60” crosscut on 1” stock, and powerful 7.5 HP motor, many companies take advantage of its versatile features. Industry leaders in a variety of specialties operate Beam Saws daily in repeated shift work.

Find Beam Saws in industries such as: 

  • logging
  • canopy manufacturing 
  • curtain wall 
  • metal roofing
  • the military
  • steel buildings
  • panel production
  • conceptual model production
  • Beam Saws cut a variety of materials. It is essential to select a blade that is compatible with that material. Original Saw Company offers several carbide blade options for Beam Saws.

    When cutting wood, choose:

    • 22.5″ General Purpose Blade for Beam Saws – 60 tooth

    When cutting aluminum, use:

    • 22.5″ Aluminum Crosscut Blade for Beam Saws – 120 tooth

    Blades are sold separately from the saw.

Saw Accessories

Saw Parts

Testimonials

Check Out Our Product Video

Do You Need Test Cuts?

Are you unsure if this machine can cut your material?

Ask about sending in a material sample to Original Saw. We will cut your material on our shop saw and make a video. Afterwards, you can review the videoed test cuts and make informed decisions. Most importantly, we want you to feel comfortable with your solutions before your purchase.

Would you like to send us your material?

Email us at customerservice@originalsaw.com or call at (800) 733-4063 to start the process.

Compatible Saw Accessories

Beam Saws come standard with a manual chain crank carriage feed and a T-slot extruded metal table with manual clamps.

Customize a Beam Saw to fit the needs of your company with the following accessories: 

  • Upgrade to a semi-automatic machine by adding on the Electronic Powered Cross Feed. The Electronic Powered Cross Feed allows cutting with the push of a button.  
  • Pneumatic Clamping speeds up processes. Customize Pneumatic Clamping for specific applications. Choose from two clamp systems or a specialized six clamp system.
  • Choose an HDPE Black Plastic Table Insert Kit. Table inserts are ideal when cutting smaller pieces.