Need Help?  800-733-4063


16″ Beam Saw (3 phase with 64″ crosscut)


  • 7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor
  • 50/60 HZ
  • 208, 230, 460 or 575 volt motor
  • 64” crosscut
  • 5” depth of cut
  • Automatic Electro-Mechanical Brake
  • Manual Chain Crank Crossfeed
  • Magnetic Starter with Low Voltage Controls
  • T-slot Extruded Metal Table
  • Manual Clamping
  • Extruded Aluminum Fence
  • Complete Upper and Lower Blade Guarding
  • Replaceable Track
  • ON/OFF Push Buttons with E-Stop
  • Powder Coated Steel Frame and Legs
  • Wrench Kit
  • Made in the USA


What Can a Beam Saw Do for an Important Cutting Processes?

The 16″ Beam Saw (3 phase with 64″ crosscut) is crucial for speeding up production.

This massive machine, weighing 1500 pounds, is made from cast iron, cast aluminum, a box tubing beam, and a steel frame. Use a Beam Saw in production for two to three work shifts per day in an industrial setting.

The model 3691-01-03 can cut 5” deep in a single pass and has the crosscut capacity of 64″ on 1” stock. Its powerful motor lets the Beam Saw cut several pieces of material at a time.

Do you have the capability to run 3 phase power at your location? If so, this is the model you want. 3 phase power creates a smoother motor start-up. There tends to be less maintenance and longer service life with no relays or capacitors inside the motor. 

Additional information

Weight 1500 lbs
Dimensions 112 × 52 × 52 in

7.5 hp 3 phase TEFC (totally enclosed, fan cooled) motor

Product Length (Inches)

Product Width (Inches)

Product Height (Inches)

Cuttable Material

, , , , , , , ,

Can do the following cuts


Max Crosscut

Max Depth Cut

Capable of Rip Cuts

Voltage Options

, , ,

Phases of Voltage Available

Pneumatic Clamping Ability?

Powered Feed Option?

Ordering & Shipping

Manufacturing of Beam Saws happens after the customer orders. Machines are considered custom and made voltage specific. If you are unsure about the power requirements of your location, please get in touch with an electrician.

Because some cutting applications are custom and specific, our team may contact you about your purchase. It is our priority to build a saw that fits our customers’ needs.

Beam Saws are assembled and tested in our facility. After being test run, the saw is packaged and placed on a skid. The legs are attached to the skid. This makes setup and installation easy.

When the saw is delivered, simply:

  1. Lift the machine.
  2. Install the legs and braces.
  3. Wire in the mag starter.
  4. Install the saw blade of your choice.


These machines have provided cutting solutions to thousands of manufacturing companies throughout the world. Count on everyday repeatability and accuracy for years to come.

  • Machine Height – 62” (1575 mm)
  • Machine Depth – 100” (12540 mm)
  • Approximate Shipping Weight – 1500 lbs
  • Approximate Shipping Dimensions – 102”x52”x48”


There are no reviews yet.

Be the first to review “16″ Beam Saw (3 phase with 64″ crosscut)”

Your email address will not be published. Required fields are marked *

  • 64” (1626 mm) maximum crosscut from 1” stock
  • 5” (127 mm) maximum depth of cut
  • 2” (50 mm) maximum depth of cut at 45 degree bevel
  • Cut Table Height – 34 ½ ” (876 mm)

This machine is perfect for cutting wood, metal, aluminum, steel, and other kinds of materials.

Companies that require deep and long cuts benefit from Beam Saws. Features that are important to Beam Saw owners are power and a variety of cutting options.  

Due to these features, Beam Saws are used in the following industries:  

  • military bases
  • curtain wall manufacturing
  • metal roofing
  • panel production
  • steel buildings
  • conceptual model production
  • canopy manufacturing 
  • logging

The type of blade required for a Beam Saw depends on the material being cut. There are several carbide blade options for Beam Saws.

When cutting wood, consider the following blades:

  • 16″ General Purpose Blade for Beam Saws – 40 tooth
  • 16″ Fine Crosscutting Blade for Beam Saws – 60 tooth

When cutting metal, use:

  • 16″ Steel Crosscut Blade for Beam Saws – 300 tooth
  • 16″ Aluminum Crosscut Blade for Beam Saws – 100 tooth

Blades are sold separately from the saw.

Saw Accessories

Saw Parts


Check Out Our Product Video

Do You Need Test Cuts?

Are you unsure if this machine can cut your material?

Ask about sending in a material sample to Original Saw. We will cut your material on our shop saw and make a video. Afterwards, you can review the videoed test cuts and make informed decisions. Most importantly, we want you to feel comfortable with your solutions before your purchase.

Would you like to send us your material?

Email us at or call at (800) 733-4063 to start the process.

Can a Beam Saw be Customized with Accessories?

Yes! A Beam Saw comes standard with a manual chain crank carriage feed and a T-slot extruded metal table with manual clamps. Many customers choose to upgrade their Beam Saws with accessories. 

  • Make a Beam Saw a semi-automatic machine by adding on the Electronic Powered Cross Feed. Enable cutting by simply pushing a button.  
  • Add pneumatic clamping to speed up processes. Customize pneumatic clamping for specific applications. Choose from two clamp systems or a specialized six clamp system.
  • Upgrade the T-slot table with an HDPE Black Plastic Table Insert Kit. Table inserts are ideal when cutting smaller pieces.