22" Super Duty Metal Cutting Saws
The Super Duty Metal Cutting Series is the ultimate workhorse of the industry. It’s capable of operating 2 to 3 shifts per day and able to do a wide variety of cutoff work including miters, bevels and compound miter work. These massive 900 pound machines are constructed of cast and ductile iron for a vibration free operation. The series is better than ever with a new, more durable full powder coated finish.
Our 22″ diameter radial saws utilize a Variable Frequency Drive to control the arbor motor. Using the VFD allows the speed of the blade to be increased over 8 seconds, which results in a smooth start up.
22” Models Catalog # 3579-22M, 3579-22L
Applications include aluminum cutting, steel cutting, as well as miter cuts, bevel cuts and compound miter cuts. Various other materials such as brass, bronze, plastics and fiberglass can also be cut.
Our metal cutting saws are much more than radial arm saws. When coupled with optional equipment, they are a platform for a wide variety of cutoff work in manual and semi-automatic as well as automatic operation when coupled with a material feeder. With years of experience in metal cutting, we can assist with setting up a machine for your required application including clamping, feeding material, and complete automatic sawing packages.
- Totally enclosed fan cooled 7.5 hp motors
- All 3-phase units are available in 208/230/380/400/460/575 voltages
- Totally enclosed fan cooled motors 1 phase units available in 208 and 230 volt – single phase motor available on 16” units only models 3579-16M and 3579-16L
- Motors manufactured by Original Saw Company
- Automatic Brake System
- Manual chain crank cross feed
- Powder Coated Heavy Gage frame and legs
- Powder Coated castings
- Large oversized aluminum t-slot table
- Full IEC magnetic starter with low voltage and overload protection
- Low voltage controls ( 24 volts at start/stop station)
- Precision ground 6” diameter blade collars
- Complete upper and lower blade guards
- Wrench pack
All Super Duty, Heavy Duty, and Contractor Duty Series motors are manufactured in our Northern Iowa facility. Producing our own motors allows us to uphold a very high level of quality in our machines. These totally enclosed fan cooled (TEFC) motors are manufactured with cooling ducts that move air through the motor laminations to keep them cool while keeping the internal portion of the motor sealed from dust and contamination. These motors also offer the added benefit of an integrated electro-mechanical brake system, these brake systems continue to operate even when the power drops out. Electronic brake systems, cannot compete with the durability or reliability of our electromechanical brake systems.
Original Saw Company’s Radial Arm Saws are manufactured utilizing high quality heavy cast iron and cast aluminum construction. These high quality American castings provide a very rigid, vibration free cutting platform to perform many different sawing and dado operations. It is because of this construction, we can proudly say our machines are the best in the industry. Many of the machines we produce today will be around for generations.
The metal cutting series comes standard with a manual chain feed assembly. This feature gives the operator better control of the carriage versus pulling the carriage by hand.
The exclusive “door style” guard that allows easier and quicker blade changes. The guard only needs to be opened to change the blade out. This is a very important feature for the ferrous cutting application where frequent blade changes are necessary for optimum cutting performance and safety.
The Metal Cutting Series comes with the standard t-slot aluminum extruded top. This top allows for easy attaching of our aluminum fence (shown), clamping systems, or table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly through out the life of the machine.
|Blade Size||22" (550 mm)||22" (550 mm)|
|Volts*||230/460 **||230/460 **|
|Brake||Auto - electronic solid state||Auto - electronic solid state|
|Arbor||1"dia ×1 3/8"||1"dia ×1 3/8"|
|Maximum Out-Rip||No ripping||No ripping|
|Max Cross Cut 1" Stock||23" (584 mm)||31" (787 mm)|
|Max Miter 45 Deg 1" Stock||16" (406 mm)||21 5/8" (549 mm)|
|Max Depth of Cut||8" (203 mm)||8" (203 mm)|